technical data sheet 1/3 straight 2 holes flange floating jack r128.292.000 solder type - cable .085 series : bma issue : 0040 f in the effort to improve our products, we reserve the right to make changes judged to be necessary. all dimensions are in mm. .. pn ao components body center contact outer contact insulator gasket others parts - - materials stainless steel beryllium copper beryllium copper ptfe - brass - - platings ( m) gold 1.3 over nickel 2 gold 1.3 over nickel 2 gold 1.3 over nickel 2 nickel 2 - -
technical data sheet 2/3 straight 2 holes flange floating jack r128.292.000 solder type - cable .085 series : bma issue : 0040 f in the effort to improve our products, we reserve the right to make changes judged to be necessary. packaging standard unit o ther 100 ?w? option contact us electrical characteristics impedance 50 ? frequency 0-22 ghz vswr 1.07 + 0.010 x f(ghz) maxi insertion loss 0.03 f(ghz) db maxi rf leakage - ( na - f(ghz)) db mini voltage rating 350 veff maxi dielectric withstanding voltage 1000 veff mini insulation resistance 5000 m ? mini mechanical characteristics center contact retention axial force ? mating end 27 nmini axial force ? opposite end 27 nmini torque na n.cm mini recommended torque mating na n.cm panel nut na n.cm clamp nut na n.cm a/f clamp nut 0.000 mm mating life 1000 cycles mini weight 0.000 g environmental operating temperature -65/+125 c hermetic seal na atm.cm3/s panel leakage na specification cable assembly stripping abcdef m m 1.78 0.00 0.00 0.00 0.00 0.00 assembly instruction : recommended cable(s) ks 1 rg 405 cable retention - pull off 136 nmini - torque na n.cm tooling part number description hexagon .. . r282.051.000 stripping tool r282.062.000 pointer gauge r282.740.000 soldering mounting r282.860.100 soldering positioner others characteristics -
technical data sheet 3/3 straight 2 holes flange floating jack r128.292.000 solder type - cable .085 series : bma issue : 0040 f in the effort to improve our products, we reserve the right to make changes judged to be necessary. components stipping dimensions a -strip the cable with the cable srtipping tool. -trim the cable inner conductor with the trimmer. body -introduce the cable into the body until contact with the body shoulder.. -place the sub-assembly on assembly jig -solder body on the cable. -let assembly cool down before removing it from the jig. tightning solder assembly jig
|
